Brand name/logo/other information
Swimming Pool Dividers JD-01
Product size: upper length 2.5, lower length 2.36, height 1.22 m.
* Anti-Wave design
* Hanging between 2 Lane lines
* Simply Separate Pool
Introduction:
1, Pool divider is made from FRP Material. It is integrated molding and its surface without secondary spraying. Owning features of high strength and corrosion prevention. both sides of the fixed hooks are 304 stainless steel material.
2, Its installation is simple. It is hanging pool divider. Hang it on the rope of the lane line and fix it with rope belt on both sides. Easy and convenient.
3, The bottom of Pool Turning Board/divider is equipped with a moving wheels. Even one person can move it easily
4, with anti-skid surface. When the athlete turns around and kicks off, it is anti-slip.
Installation:
Put the swimming pool dividing board into the water, tilt slightly, so that the water enters at the bottom of the water injection hole. After filling the water, let the pool partition board stand upright in the water. At this time, if the horizontal height of the pool divider is unbalanced. Open the side water injection hole. And inject a little water in the higher side and keep the horizontal surface height consistent. And then cover the round block again. The installation is completed
Product size: upper length 2.5, lower length 2.36, height 1.22 m.
* Anti-Wave design
* Hanging between 2 Lane lines
* Simply Separate Pool
Toll-Free: +86-15986830353, Shirley Yang
lE-maol: info@hlbpoolsandspas.com, shirley@hlbpoolsandspas.com
Location: Room3A08,Huasui Building,Xixiang Street, Bao'an District, Shenzhen, Guangdong Province, China. Post Code 518000
Oening Hours: Toll-Free: +86-15986830353, Shirley Yang
© 2024 Shenzhen Hailanbao Technology Co.,Ltd . All rights reserved Site Map
点击右上角
分享给朋友吧
